Dry goods! LED built-in power supply can be seen with your eyes!

At present, in the general led lighting market, there are non-isolated and isolated driving power sources. The so-called isolated power supply means that the input mains (220V AC in China) is electrically isolated from the output, and the non-isolated power supply is not isolated. In the LED luminaire, the isolated power-driven LED lamp bead is separated from the 220V mains, and the non-isolated power-driven lamp bead is connected to the mains.

Performance, the advantages of isolated power supply is: no threat to the human body, wide voltage performance is very good, non-isolated is now very mature, the voltage range is slightly worse than the isolation, the voltage range is between 110V-300V, and The isolated power supply can achieve 60-300V. High and low currents are very uniform. The isolated drive is safe but less efficient, and the non-isolated drive is more efficient. The isolated or non-isolated drive should be selected according to the actual requirements. From the constant current accuracy: the isolation type can be achieved within ±5%, and the non-isolated type can also be done.

Non-isolated circuits are very sensitive to surges and have poor rejection. Lightning surge, this voltage is instantaneous high voltage, up to several thousand volts, the time is very short, the energy is very strong, this voltage enters the power supply, for the non-isolated BUCK circuit, it will instantaneously convey the output, destroy the constant current detection ring, or Further destroying the chip, causing 300v straight through, and burning the entire lamp, the strategy is to add lightning protection and surge devices to the input. In fact, it refers to the non-isolated power supply. When the shipment is in bulk, the repair rate is higher than that of the isolated LED driver, mostly because it is damaged. The probability of isolated power supply bursting is much smaller, and non-isolated is generally around 2% to 3%.

LED drive power, what is non-isolated? What is isolation? Can the power supply be certified? What is the difference between the power supply of A manufacturer and B manufacturer?

Our goal is to make it possible for groups other than engineers to figure out what LED power is.















Product Brand:SnCu0.7.SnCu0.3.SnCu3.SnAg0.5Cu0.5.SnAg3Cu.SnAg4Cu.Sn Cu1Ag.

                        SnCu4Ag1.Sn Cu6Ag2.Sn Sb5

The drafter of lead free solder national standards of GB/T20422-2006.

The drafter of soft solder test method national standards of GB/T28770-2012.

The drafter of lead free solder-chemical composition and type industry standards of SJ001-2007.

Lead Free Solder Wire

Lead Free Solder Wire,Rosin Core Solder,Flux Core Solder,Low Temperature Solder

Shaoxing Tianlong Tin Materials Co.,Ltd. , https://www.tianlongspray.com